Showing posts with label batik. Show all posts
Showing posts with label batik. Show all posts

Wednesday, August 15, 2012

batik print banner!

The first success in my new mission to complete my nearly 100 unfinished projects....
It's a celebration banner made from beautiful batik scraps made by my friend, Annalisa, from my visit to St John, US Virgin Island. When I was working at the the textile studio there, this seemed like the best way to capture the bright variety of color and design in Annalisa's batik. These are all on retired bedsheets from Maho Bay Camps.


Saturday, November 12, 2011

batik skirt

When my friend Annalisa was in town recently, she brought a nice surprise: the batik skirt I started last year in the Virgin Islands!

We ran out of time to finish dyeing and dewaxing before I left, so Annalisa kindly finished that for me (that's the hardest part of batik).
It's always a fun surprise to see the final result of a dye project-especially a batik project-and I love how this turned out!

Some photos of the batik process:
(sew skirt, sketch design in pencil onto fabric, then fill in with wax)
Emerging from the first dyebath:
Adding more wax to increase detail before dyeing again in a darker color
For Summer, this is great with sandals and t-shirts.
For Winter, I'm going to wear this with burgundy or navy tights and colorful sweaters!

Monday, November 8, 2010

Black walnut dye 2 ways


As mentioned here, I was thrilled to acquired some buckets of fermenting black walnut (Juglans nigra) hulls.
I finally got around to dyeing some wool with the liquid, here's a little "how to" and my results:
-Ferment walnut hulls in water 1 week
-strain liquid through finely woven cloth bag to remove grit (very hard to get it out of the yarn later....)
-Add fiber (I used an alpaca lace weight and Icelandic Lopi as well as a few squares of cotton cloth for shibori). I didn't use a mordant, black walnut has enough tannins to act as a mordant.
-Heat slowly and keep warm/simmer about 20 min.
-Let fiber soak in dye 2 days.
-Rinse and dry. Each fiber took slightly different shades of brown.

I read that iron mordant will give a dark brown/black color. After I was finished with unmordanted dyeing, I dissolved iron mordant (you could use nails, pieces of iron, etc) in hot water and added it to the dye bath. I then soaked the fiber, photos coming soon....

The potency, abundance, ease of dyeing, and especially the shades of orange-browns and black-browns make me think Black Walnut would be ideal for batik tree skirts. I wish I had the time to sew up a bunch of linen skirts, wax and dye them using my extra two buckets of ready to go dye.....alas.

At least Black Walnut is easy to find and could be a predictable Fall dye for next year's projects :)

Monday, August 23, 2010

batik lesson #1 - vine print


In May, I worked in the Caribbean at a recycled art center at Maho Bay Camps on US Virgin Island St. John. My friend, Annalisa, runs the batik studio at the art center and I was lucky enough to visit her and work there for a month. I intended to post photos a long time ago from that trip, both scenic and of the sewing and batik, but I've been busy. Here is the first of a series of posts.

Batik lesson from a tropical recycled art center:
1. Choose Material- we used sheets recycled from the laundry services of the camps. 100% cotton was our prefernce, but sometimes we had to use 50-50 Cotton/Polyester. Dye does not adhere well to polyester and wax is difficult to remove from polyester, so we do not recommend it! Use Cotton, Rayon or silk for batik.
Here, I am using a vintage/thrifted 100% cotton curtain for this personal sample that I will take home. Be sure material is washed, free of oil-stains, and ironed before using.
2. Create a stamp- Annalisa cuts her stamps from old, foam mattress pads salvaged from the housekeeping department of Maho Bay Camps. You can create any shape or image if you are careful in the planning and cutting. You can see some stamp examples in the photo above. Here, Annalisa used razor blades to cut this stamp to portray a plant growing near the art center. (I thought I took a photo of the plant, but I can't find it....). This stamp is great because she made sure the upper side of the image fit well with the lower side of the image so it can be stamped in series like a vine.
(I thought I took some close-up photos of stamps, but you will have to get the idea from these photos)
3. Wax- melt paraffin (or a combination of paraffin, microcrystallin, and beeswax) in an electric skillet. These are cheap at thrift stores and allows a portable, constant low heat source. Try to batik outdoors or in a well ventilated area. Wax fumes are very bad for your lungs. Never heat wax to the point where it vaporizes and you see fumes. Always use a fan to blow the air near the wax away from you.
(Here is Annalisa stamping cloth with wax)
4. Stamping- Set stamps in the melted wax, there should be about 1/2" wax in skillet. The wax will soak into the stamp like a sponge. Lift the stamp and shake, but don't tip before stamping. You can do a series of 5-10 images before re-dipping the stamp in wax. The first image will be little "juicier" than the last image but this can be managed through practice. Use a plastic sheet under your work, and lift your waxed material frequently while still warm to prevent it from sticking to the sheet and then leaving fibers exposed.
*When finished stamping, fix any mistakes manually with a triangle piece of foam dipped in wax. After waxing the front, turn the material over and fill in any areas where the wax didn't soak through and saturate the fibers on the back. Any exposed fibers will take up color when dyed.
(cloth before dyeing, waxed with a variety of stamps)
5. Dye-Soak the waxed material in soda ash solution. Mix the dye according to instructions. Here we used a fiber reactive dyebath in plastic tubs.
6. Rinse- We sprayed with a hose
7. De-wax- Unfortunately, I don't have any photos of this step...and it is one of the more important steps. After all that waxing and dyeing, now we need to get the wax off. The best way is by boiling the cloth in water on an outdoor burner. As the wax floats to the top, skim it off and store in a plastic container to re-melt for later batik. Boil, agitate the cloth, stir and pound with a long stick, skim off wax, repeat. Do a preliminary de-wax to remove the bulk of the wax, change water, and then do a more refined de-wax to remove as much wax as possible. This is a physically demanding step, fyi.
8. Wash, Dry, Iron your new batik print!
9. And finally, the Sewing step. Cut out and sew cute things! From my two pieces of green vine print batik, I cut out two shoulder bags and used the scraps to make tiny zippered pouches/boxes/cozies (whatever you want to call them). I love making cozies. It's nice when everything has it's own container. I have a long list of objects that need cozies.




**Thanks Annalisa for the batik lesson!

Saturday, May 15, 2010

Virgin Islands update #1


I've arrived!
St. John Island is beautiful and Maho Bay Camps are great. It's all a little different than I was imagining, but that's life...
The condensed version:

I have a "tent" to my self

up on the hill

with a yellow light so it won't attract bugs, a fan, an outlet to charge my phone, camera, and computer, access to communal bathrooms with cold showers and flushing toilets,

lizards, gecko-types, anoles, etc. to eat the bugs, (and iguanas!)

boardwalks and stairs to get myself everywhere,

music from birds, frogs, and crickets,

breakfast and dinner at the restaurant,

snorkeling in beautiful coral ecosystems, abundant sea life to identify,

a textiles studio tent


with unlimited fabric

to batik and sew,

tropical plants to find and learn,

jasmine to perfume the hot air,

turquoise waters, frequent rain showers, and sun!

I also have lots of time with my good friend Annalisa - an excellent artist in EVERY medium.

You may remember her from our recycled clothing competition in Feb 2008.

She is a brave snorkeler, so I stick very close to her in the water!

Joy is a high school intern in our textiles studio:

And Deborah (somehow I don't have a picture yet) is a seamstress here for the month.

That's it :)

I intended to post a photo from each day using my borrowed mini-computer, but internet reception is spotty/non-existent. Now that I'm settled and have a daily system, I'm going to dedicate more effort to posting photos.

Thinking of you all, it would be fun to have more family and friends here to explore with!

Thursday, March 6, 2008

Tree skirt

Here is the idea:



Here are the materials:
salvaged linen scraps from former skirts, garage sales, thrift stores, and my grandma's collection.




I made a six-panel skirt using the different colors, weights, and textures of the linen.




I carefully drew branches on the skirt using pencil. This was the most time-consuming step of the entire process. After, i used Annalisa's batik wax (she is an amazing batik artist and also taught batik in Africa for several years!) to fill in all spaces i did not want to be dyed.



This also took some time, but it created a beautiful, translucent image.



After the dye bath, the branches were more red than expected, so the skirt was dyed again with a blue-brown dye. This turned out great and made the entire design more complex. The stiff, waxed sections of the skirt cracked when crumpled into the dye bucket, which made more intricate branching than i could have drawn.



Here is Rachael at a fitting. I love how the skirt turned out.

"The tree skirt"